How To Add Zoom In Effect In Imovie

Download Article

Download Commodity

IMovie allows users to use a zoom characteristic with any photo, notwithstanding frame video shot, or video clip that has been imported into your iMovie project. The act of zooming in and out and panning back and forth over a photo, still frame video shot, or video is called the "Ken Burns Effect" and is how the consequence buttons are designated within the iMovie program. Ken Burns is a noted film documentarian that developed this particular zoom and pan technique.

Steps Download Article

ane

Open your iMovie program and select the iMovie project you wish to add together the zoom outcome to.
2

Click on the video clip you are applying the zoom event to within the effect browser window in the upper middle portion of the iMovie project screen. This volition make the selected clip testify upwards in the window to the right of the video prune consequence browser. Verify yous have selected the appropriate video clip to utilize the zoom issue to.

Advertizing
3

Click on the "Crop" push button located on the centre pane separating the elevation project workspace from the bottom. This button is designated by a foursquare with the 2 lines of the square that create the corners overlapping each other. This push button volition bring up "Fit," "Ingather," and "Ken Burns" video editing effects onto the selected video clip within the editing viewer.
iv

Select the "Ken Burns" button located at the upper center portion of the video editing screen. This will bring up a dark-green rectangle and a red rectangle.
five
Place the rectangles according to where y'all want the zoom issue to brainstorm and where yous want the issue to finish.
- Identify the dark-green rectangle over the paradigm area you want the result to zoom in on when the clip starts; place the red rectangle over the area y'all desire the zoom event to end on. For case, the green rectangle tin can exist focused on a smaller surface area, which volition create a zoomed in upshot, and the red rectangle can be placed in a larger attribute of the clip to zoom out. You tin can move these rectangles around by clicking and dragging each around to the specific spot you demand the zoom effect to take place.
- Also, resize the rectangles accordingly by dragging the corners of each rectangle back and forth, resizing the paradigm area.
- Selecting the double arrow push button at the bottom of the video editing screen will make the green and red rectangles swap positions.
6

Preview the Ken Burns event you accept just created by clicking on the "Play" button in the video viewer/editor window. This button is designated by the play symbol (sideways triangle). Adjust the rectangles to get the result exactly how you lot want.
7

Click on the "Done" button in one case you accept modified the result to its desired position to apply the effects you have only created.

Add together New Question

Question

How exercise I cutting a clip in iMovie?

If iMovie is on a mobile device, drag the stop of the prune to the desired length. If you wish to cut from the centre of a prune, drag the time marker to the desired cutting point and press the scissor option.
Question

How do I brand the effect end?

Apply two fingers and click the clip where you desire it to end. Click "split clip," then on the new clip just remove the upshot.